Tin Toy Shop & Schuco Toys

Gold Model - Suitable for HO, 1/32 and 1/24 Commercial Track Racing.

Features:
- Variable sensitivity adjustment allows the controller to be fine tuned to almost any combination of power, track conditions and cars of any scale.
- Over 40,000 possible combinations of controller settings.
- New “Silver Series” ultra robust design features.

Self-resetting electronic circuit breaker, brass & steel trigger pivot reduces trigger friction and improves controller feel, pair of pilot lights provides a visual indication of power to the controller and also indicates the polarity of power going to the controller, internal handle-protected anodized aluminum heat sink, extra long leads, heavy duty 13 gage super flexible wire, high temp silicone insulation, solid copper alligator clips, color coded insulating boots, high impact Lexan handle, electronic semiconductor design with wide range of control, low friction graphite impregnated wiper button, brass alloy wiper contacts, stainless steel hardware throughout, upgradeable modular design.

Contrary to the picture, this particular controller has a transparent housing and comes with a European 3-pin connector (most commonly used on large hobby & rental tracks.

FREE shipping to ANY destination in the world !!

A beautifully finished Bertone slotcar in scale 1/32 (the red is actually much "warmer" than in the pictures but our bright studio lights "bleach" it somewhat) in "Teamslot" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

A beautifully finished Bertone slotcar in scale 1/32 in "Squadra Corse" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

A beautifully finished Bertone slotcar in scale 1/32 in "Spa 1971 # 42" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

A beautifully finished Bertone slotcar in scale 1/32 in "Spa 1971 # 40" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Cartrix of Spain, is a wonderfully detailed replica of a Silver Grey BMW Z3 roadster.

This VERY fast ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 5.5 inches
• Great detailing
• Strong magnet for improved roadholding
• Rear Wheel Drive
• Weight out-of-the-box: 70 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Cartrix of Spain, is a wonderfully detailed replica of a Telepizza sponsored BMW Z3 cabriolet that competed in the Champion Raid.

This VERY fast ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 5.5 inches
• Great detailing and fine tampo print
• TX1 motor (13,000 RPM @ 12 Volt)
• Strong magnet for improved roadholding
• Rear Wheel Drive
• Weight out-of-the-box: 74 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

This 1/32nd scale slotcar, made by Spirit of Spain, is a wonderfully detailed replica of S/N 1050, after it was modified to "M" specification, as entered by Scuderia Filipinetti and raced by Corrado Manfredini and Giancarlo Gagliardi during the 1971 Le Mans 24 Hours.

Manfredini & Gagliardi had to retire in the 14th lap due to gearbox trouble.

This ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Sidewinder Mabuchi motor
• Mild magnet for improved roadholding
• Weight Overall, out of the box: 78 gramms
• Will run on all common 12V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

Comes in a Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Cartrix of Spain, is a wonderfully detailed replica of the Honda NSX Mobil 1 sponsored race car.

This VERY fast ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Weight out-of-the-box: 86 gramms
• TX4 motor (performance similar to the Ninco NC3)
• Strong magnet for improved roadholding
• Rear Wheel Drive
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

LIMITED AVAILABILITY !

This 1/32nd scale slotcar, made by Cartrix of Spain, is a wonderfully detailed replica of the Hyundai Accent WRC as driven by Carlo Cassina and Piero Liatti in the 2001 Monte Carlo Rally. Unfortunately, the gentlemen had to retire on special stage R1 due to engine problems.

This VERY fast ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 5.5 inches
• Great detailing with brake discs, roll cage and spare wheel and with fine tampo print
• 4-wheel-drive
• Strong magnet for improved roadholding
• Strong TX4 motor (peformance similar to Ninco NC3)
• Weight out-of-the-box: 90 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

LIMITED AVAILABILITY !

A great slot car, ready-to-run and with the following specification:

• Scale: 1/32
• Overall length ca. 5.9 inches
• Great detailing with brake discs and fine tampo print
• Inline Mabuchi motor
• Innovative front suspension
• Weight Overall, out of the box: 84g
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Spirit of Spain, is a wonderfully detailed replica of the lola as raced by Lammers, Cox & Coronel during the 2000 Le Mans 24 Hours.

The car was retired in lap 38 due to the loss of the right rear wheel.

This ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Sidewinder Mabuchi motor
• Mild magnet for improved roadholding
• Weight Overall, out of the box: 78 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

Comes in Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This car is a replica of the McLaren that Chuck Parsons drove in the final round of the 1971 CanAm season at Riverside. Chuck finished the race in 5th place, 2 laps behind winner Denny Hulme.

This is probably the best detailed ready-to-run slot car money can buy at the moment:

• Scale: 1/32
• Overall length ca. 5.9 inches
• Tremendously detailed
• Working differential on the rear axle
• Weight Overall, out of the box: 100g
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Slot.it of Italy, is a wonderfully detailed replica of the Porsche 956 C as raced by George Follmer, John Morton & Kenper Miller during the 1986 Le Mans 24 Hours.

The car would finish the race in 3rd position with 354 laps or 4.796 KM to its name.

This ready-to-run slotcar has the following specifications:

• 1/32 scale
• Overall length approximately 5.8 inches
• Body: ABS plastic, low COG, light weight
• Chassis: Composite plastic motor mount + abs
• Transmission: Inline, 9 / 28 tooth ProAxle crown. Integral motor/rear axle H.R.S. support
• Rear wheels: ProAxle Aluminium grub screw wheels
• Bushings: Bronze gimbal HRS type
• Axles: ProAxle steel rectified 2.38mm / 3/32"
• Motor: V12/2b-25K 25.000 RPM @12V, balanced armature
• Weight Overall, out of the box: 78g.
• Will run on all common 9 - 16 Volt home and club tracks.

Comes in Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Cartrix of Spain, is a wonderfully detailed replica of a Boxster with its top down.

This VERY fast ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 5.5 inches
• Great detailing
• Strong magnet for improved roadholding
• Rear Wheel Drive
• Weight out-of-the-box: 68 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

A beautifully finished A110 street car in bright red.

Technical specification:

• Scale: 1/32
• Length: Approximately 5 inches / 12.5 cm
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Spirit of Spain, is a wonderfully detailed replica of the Reynard 2KQ-LM Volkswagen as entered by MOPAR Team Oreca and raced by Didier Theys, Jeffrey van Hooydonck and Didier André during the 2000 edition of the Le Mans 24 Hours.

The trio finished the race in 20th position with a total of 292 laps to their name.

This ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Inline Mabuchi motor
• Strong magnet for improved roadholding
• Weight Overall, out of the box: 78 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)
• Comes in Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Spirit of Spain, is a wonderfully detailed replica of the Reynard 01Q-LM Judd as entered by Dick Barbour Racing and raced by John Graham, Mila Duno and David Murry during the 2001 edition of the Le Mans 24 Hours.

The car was retired in lap 4 due to an accident.

This ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Inline Mabuchi motor
• Strong magnet for improved roadholding
• Weight Overall, out of the box: 78 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

Comes in Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Spirit of Spain, is a wonderfully detailed replica of the Reynard 2KQ-LM Volkswagen as entered by ROC and raced by Jordi Gene, Jean-Christophe Bouillion and Jerome Policand during the 2000 edition of the Le Mans 24 Hours.

The car was retired in lap 72 due to engine problems.

This ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Inline Mabuchi motor
• Strong magnet for improved roadholding
• Weight Overall, out of the box: 78 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)
• Comes in Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

A beautifully finished Saleen S7 slotcar in scale 1/32.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 6 inches
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!